Registered UsersSign In
Search Catalog
      GO   
 All Categories    PEM® CASTSERT™ Press-in Inserts - Metric
PennEngineering
All Categories > PEM® Press-in Inserts for Castings > PEM® CASTSERT™ Press-in Inserts - Metric > Part # CKS-M6-2  

Part # CKS-M6-2, PEM® CASTSERT™ Press-in Inserts - Metric


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.


  • Designed for flush installation with flat punch and anvil into blind holes or thru-holes
  • Process cost savings vs. coil inserts or thread tapping
  • Installed into drilled holes or as-cast holes with low draft angle
  • Pilot for rapid seating and self-alignment
  • Symmetric for auto-feed capability

  • Fastener drawings and models are available at www.pemnet.com






     Specifications   

    Thread Size x Pitch

    M6 x 1

    Type

    CKS

    Thread Code

    M6

    Length A ±0.13

    View
    15.88 mm

    Pilot C Max.

    10.74 mm

    After Knurl E (Nom.)

    11.48 mm

    Min. Sheet Thickness R

    16 mm

    Straight Hole Dia. D + 0.08

    11.11 mm

    Min. Dia. H of Tapered Hole at Length R1

    10.77 mm

    Min. Dist. Hole C/L to Edge

    8.71 mm

    Standard Material

    300 Series Stainless Steel

    Standard Finish

    Passivated and/or tested per ASTM A380

    CAD Supplier

    PennEngineering® PEM®
    1 Draft hole performance will vary greatly depending on length of engagement of the knurl over the installed length. For best results, recommend use of 3 degree or less total draft and design hole as close to H as possible at depth R to optimize length and depth of knurl engagement.



     DOWNLOADS 

    CK™ Press-In Inserts For Castings And Soft Metals
    (PDF, 1047KB)