Part Search
Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    PEM® CASTSERT™ Press-in Inserts - Unified
PennEngineering
All Categories > PEM® Press-in Inserts for Castings > PEM® CASTSERT™ Press-in Inserts - Unified > Part # CKS-832-1  

Part # CKS-832-1, PEM® CASTSERT™ Press-in Inserts - Unified

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.


  • Designed for flush installation with flat punch and anvil into blind holes or thru-holes
  • Process cost savings vs. coil inserts or thread tapping
  • Installed into drilled holes or as-cast holes with low draft angle
  • Pilot for rapid seating and self-alignment
  • Symmetric for auto-feed capability

    • Fastener drawings and models are available at www.pemnet.com




     Specifications   

    Thread Size
    		.164-32 (#8-32)

    Type
    		CKS

    Thread Code
    		832

    Length A ±.005

     View
    .250 in

    Pilot C Max.
    		.266 in

    After Knurl E (Nom.)
    		.295 in

    Min. Sheet Thickness R
    		.255 in

    Straight Hole Dia. D + .003 - .000
    		.281 in

    Min. Dia. H of Tapered Hole at Length R1
    		.267 in

    Min. Dist. Hole C/L to Edge
    		.225 in

    Standard Material
    		300 Series Stainless Steel

    Standard Finish
    		Passivated and/or tested per ASTM A360

    CAD Supplier
    		PennEngineering® PEM®
    1 Draft hole performance will vary greatly depending on length of engagement of the knurl over the installed length. For best results, recommend use of 3 degree or less total draft and design hole as close to H as possible at depth R to optimize length and depth of knurl engagement.



     DOWNLOADS 

    CK™ Press-In Inserts For Castings And Soft Metals
    (PDF, 1047KB)