Batch CAD Cart (0)
  • Cart is empty

  • A9N™ Clinch Nuts

    Application area

    • Can be universally used for component thicknesses from 1.20 to 6.00mm depending on thread sized
    • Larger anti-rotation features to increase performance in aluminum
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Designed to clinch into aluminum with a pre-pierced hole
    • Suitable for use with surface-treated, galvanized or painted components

    Technical Characteristics

    • Thread sizes: M6 to M10
    • P.C. 10 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • NMR Clinch Nuts - Metric

    Application area

    • For screwing counter plates with additional centering function
    • Compression limiter

    Technical Characteristics

    • Thread sizes M6 – M8
    • Can be universally used for various sheet metal thicknesses up to 2.50 mm.
    • Suitable for extremely high dynamic and static axial loads
    • High resistance to twist and ejection forces, even for thin sheet metal

  • HI Pierce Nut

    EU Specific Fastener

    Application area

    • Can be used universally for component thicknesses of .8-1.75 mm and a tensile strength of up to 800 MPa
    • Suitable for a wide range of high static load cases
    • High torsion resistance in thin sheets
    • Can also be used in aluminum
    • Suitable for surface-treated, galvanized or painted components

    Technical Characteristics

    • Thread sizes M6 – M8
    • Self-piercing, one-step processing (no hole preparation necessary)
    • P.C. 8.8 (standard)
    • Corrosion resistance according to customer requirements
    • No impairment of the structure and function of the thread or damage by welding spatter
    • High resistance to twist out and push out forces, even with thin component thicknesses
    • Tolerance field limits for the positioning of the nut can be halved (compared to welding processes)
    • Simple, process-accompanying and non-destructive quality checks by the worker instead of time-consuming destructive tests

  • HS Pierce Nut

    NA Specific Fastener

    Application area

    • Can be universally used for component thicknesses from 0.64mm to 2.79mm
    • Can be used in applications utilizing aluminum to HSLA
    • This nut self-pierces the material so no pre-pierced hole is required
    • Can be installed in a progressive die or in a C-Frame operation
    • Suitable for use with surface-treated, galvanized, or painted components
    • Typically, no bowl feeder is required as they are supplied on spools
    • When the bulk version is utilized a feeder would be required

    Technical Characteristics

    • Thread sizes: M5 – M8
    • Property Class 9 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to torque forces, even for thin sheet metal
    • Stud positioning tolerances can be halved as compared to welding methods
    • Straightforward, in-process non-destructive quality testing possible, instead of destructive testing

  • MHD™ Series Heavy Metal Clinch Nuts

    Application area

    • Can be universally used for component thicknesses from 1.40 to 5.10mm depending on thread sized
    • Can install into material with tensile strengths of up to 700 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Designed to be a self-piercing nut for most substrates
    • Suitable for use with surface-treated, galvanized or painted components

    Technical Characteristics

    • Thread sizes: M6 to M12
    • P.C. 10 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist out and push out forces
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • MHN™ Series Round Clinch Nuts

    Application area

    • Can be universally used for component thicknesses from 0.7 to 3.5 mm and tensile strengths of up to 700 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Designed to be a self-piercing nut
    • Suitable for use with surface-treated, galvanized or painted components

    Technical Characteristics

    • Thread sizes: M6 to M12
    • P.C. 10 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces, even for thin sheet metals
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • REN Rivet Nuts

    Application area

    • Suitable for sheet thickness or 4.00 mm to 8.00mm
    • For high axial loads in combination with limited installation space

    Technical Characteristics

    • Thread sizes M8 – M10
    • Suitable for extremely high dynamic and static axial loads
    • High resistance to twist and ejection forces, even for thick sheet metal

  • RND Rivet Nuts

    Application area

    • These rivet nuts can be universally used for component thicknesses from 0.6 to 3.5 mm and tensile strengths of up to 1500 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Also suitable for the accommodation of lateral forces
    • Can be used for GRP, CFRP, aluminum or other materials
    • Suitable for use with surface-treated, galvanized or painted components

    Technical Characteristics

    • Thread sizes: M6 to M12
    • P.C. 8.8 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No component material thinning during riveting process
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces, even for thin sheet metals
    • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • RND Light Rivet Nuts

    Application area

    • These rivet nuts can be universally used for component thicknesses from 0.6 to 3.0 mm and tensile strengths of up to 1500 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Also suitable for the accommodation of lateral forces
    • Can be used for aluminum through press hardened steel
    • Suitable for use with surface-treated, galvanized or painted components
    • Optimized in terms of weight and costs as compared to the RND™ (standard)

    Technical Characteristics

    • Thread sizes: M6 to M8
    • P.C. 8.8 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No component material thinning during riveting process
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces, even for thin sheet metals
    • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
    • Can withstand high loads on both sides

  • RSF Rivet Nuts

    Application area

    • Can be used for component thicknesses from 0.75 to 4.0 mm and tensile strengths of up to 1200 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Also suitable for the accommodation of lateral forces
    • Can be used for GRP, CFRP, aluminum or other materials
    • Suitable for use with surface-treated, galvanized or painted components

    Technical Characteristics

    • Thread sizes: M6 to M12
    • P.C. 8.8 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No component material thinning during riveting process
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces, even for thin sheet metals
    • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • RSK Pierce and Rivet Nuts

    EU Specific Fastener

    Application area

    • Can be used for component thicknesses from 0.75 to 2.0 mm and tensile strengths of up to 1200 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Also suitable for the accommodation of lateral forces
    • Can be used for aluminum
    • Suitable for use with surface-treated, galvanized or painted components

    Technical Characteristics

    • The nut is placed from the screw fitting side
    • Thread sizes: M6 and M8
    • P.C. 8.8 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces, even for thin sheet metals
    • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • RSN Rivet Nuts

    Application area

    • Round rivet nuts require little space
    • Can be universally used for component thicknesses from 0.8 to 4.0 mm and tensile strengths of up to 1200 MPa
    • Suitable for a wide range of high dynamic, static and impact load conditions
    • Suitable for use where threaded fittings need to be resistant to high axial forces
    • Also suitable for the accommodation of lateral forces
    • Can be used for GRP, CFRP, aluminum or other materials
    • Suitable for use with surface-treated, galvanized or painted components

    Technical characteristics

    • Thread sizes: M6 to M14
    • P.C. 8.8 (standard)
    • Resistance to corrosion in accordance with the customer’s requirements
    • No component material thinning during riveting process
    • No adverse effects on the joint or function of the thread; no damage due to weld spatters
    • High resistance to twist and ejection forces, even for thin sheet metals
    • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
    • Nut positioning tolerance ranges can be halved as compared to welding methods
    • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests

  • UM Pierce Nut - Metric

    EU Specific Fastener

    Application area

    • For single-stage processing and moderate loading cases.

    Technical characteristics

    • Thread sizes M5 – M10
    • Pierce nut can be universally used for various sheet metal thicknesses up to 6.00 mm
    • Suitable for quasi-static loads
    • Excellent cost/performance ratio
    • High resistance to twist-out/push-out forces, even for thin sheet metal

  • Universal Pierce Nut

    NA Specific Fastener

    Application area

    • For single-stage processing and moderate loading cases
    • Emboss required in most cases

    Technical characteristics

    • Thread sizes M5 – M8
    • Pierce nut can be universally used for various sheet metal thicknesses up to 6.00 mm
    • Suitable for quasi-static loads
    • Excellent cost/performance ratio
    • High resistance to torque forces, even for thin sheet metal