Studs

Application area

• Can be universally used for component thicknesses from 2.0mm to 6.0mm
• Can be used in applications utilizing mild steel or HSLA
• Can be installed in a progressive die or in a C-frame operation
• Suitable for use with surface-treated, galvanized, or painted components

Technical Characteristics

• Thread sizes: M6 – M10
• Resistance to corrosion in accordance with the customer’s requirements
• Requires a pre-pierced hole in the application
• No component material thinning during riveting process
• No adverse effects on the joint or function of the thread; no damage due to weld spatters
• High resistance to ...

Application area

• Can be used for component thicknesses from 1.00 to 4.00 mm and tensile strengths of up to 1000 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Can be used for aluminum or other materials
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M12
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• Pre-punched processing
• No adverse effects on the joint or function of the ...

Application area

• Can be used for component thicknesses from 0.8 to 2.5 mm and tensile strengths of up to 1500 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Can be used for aluminum or other materials, including press hardened steel
• Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

• Thread sizes: M6 to M8
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the customer’s requirements
• Requires a pre-pierced hole in the ...

Application area

• These press-in and rivet studs can be universally used for component thicknesses from 0.60 to 3.50 mm and tensile strengths of up to 1200 MPa
• Suitable for a wide range of high dynamic, static and impact load conditions
• Suitable for use where threaded fittings need to be resistant to high axial forces
• Also suitable for the accommodation of lateral forces
• Can be used for GRP, CFRP, aluminium or other materials
• Suitable for use with surface-treated, galvanised or painted components

Technical characteristics

• Thread sizes: M5 to M10
• P.C. 8.8 (standard)
• Resistance to corrosion in accordance with the ...