PEM® CASTSERT™ Press-in Inserts - Metric On PennEngineering

For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.

Designed for flush installation with flat punch and anvil into blind holes or thru-holes

Process cost savings vs. coil inserts or thread tapping

Installed into drilled holes or as-cast holes with low draft angle

Pilot for rapid seating and self-alignment

Symmetric for auto-feed capability

Fastener drawings and models are available at www.pemnet.com

Part #	Thread Size x Pitch	Type	Length A ±0.13	After Knurl E (Nom.)	Standard Material	Standard Finish	CAD
CKS-M2.5-1	N/A M2.5 x 0.45	N/A CKS	N/A 3.18 mm	N/A 4.98 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M2.5-2	N/A M2.5 x 0.45	N/A CKS	N/A 6.35 mm	N/A 4.98 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M3-1	N/A M3 x 0.5	N/A CKS	N/A 4.45 mm	N/A 5.79 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M3-2	N/A M3 x 0.5	N/A CKS	N/A 7.62 mm	N/A 5.79 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M4-1	N/A M4 x 0.7	N/A CKS	N/A 6.35 mm	N/A 7.49 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M4-2	N/A M4 x 0.7	N/A CKS	N/A 12.07 mm	N/A 7.49 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M5-1	N/A M5 x 0.8	N/A CKS	N/A 7.62 mm	N/A 9.09 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M5-2	N/A M5 x 0.8	N/A CKS	N/A 13.34 mm	N/A 9.09 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M6-1	N/A M6 x 1	N/A CKS	N/A 9.53 mm	N/A 11.48 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A
CKS-M6-2	N/A M6 x 1	N/A CKS	N/A 15.88 mm	N/A 11.48 mm	N/A 300 Series Stainless Steel	N/A Passivated and/or tested per ASTM A380	N/A

Part #

Thread Size x Pitch

Type

Length A ±0.13

After Knurl E (Nom.)

Standard Material

Standard Finish

CAD

CKS-M2.5-1

N/A M2.5 x 0.45

N/A CKS

N/A 3.18 mm

N/A 4.98 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M2.5-2

N/A M2.5 x 0.45

N/A CKS

N/A 6.35 mm

N/A 4.98 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M3-1

N/A M3 x 0.5

N/A CKS

N/A 4.45 mm

N/A 5.79 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M3-2

N/A M3 x 0.5

N/A CKS

N/A 7.62 mm

N/A 5.79 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M4-1

N/A M4 x 0.7

N/A CKS

N/A 6.35 mm

N/A 7.49 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M4-2

N/A M4 x 0.7

N/A CKS

N/A 12.07 mm

N/A 7.49 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M5-1

N/A M5 x 0.8

N/A CKS

N/A 7.62 mm

N/A 9.09 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M5-2

N/A M5 x 0.8

N/A CKS

N/A 13.34 mm

N/A 9.09 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M6-1

N/A M6 x 1

N/A CKS

N/A 9.53 mm

N/A 11.48 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A

CKS-M6-2

N/A M6 x 1

N/A CKS

N/A 15.88 mm

N/A 11.48 mm

N/A 300 Series Stainless Steel

N/A Passivated and/or tested per ASTM A380

N/A