Catalog
CAD (0)
▾
PEM® PEMFLEX® self-locking, self-clinching fasteners retain their repeated use and effective prevailing locking torque.
- Shoulder provides increased performance.
- Flexing action permits repeated use and effective locking torque.
- Flange provides positive stop during installation.
PEM® PEMFLEX® self-locking, self-clinching fasteners retain their repeated use and effective prevailing locking torque.
PEM all-metal, self-locking fasteners are available in steel, stainless steel, and aluminum. Types LK (steel) and LKS (stainless) are treated with a black dry film lubricant for better locking performance. Type LKA (aluminum) must be used with a lubricated screw. The PEM design utilizes two rugged, semicircular flexing jaws instead of several less-supported segments. The greater ruggedness and retention of this PEMFLEX action prevents relaxation and loosening of the fastener in severe service.
This PEMFLEX design also protects the screw threads. Clearances obtained by only two interruptions of a full circumference, together with the spreading of the jaws by the entering screw, minimize the possibility of thread damage. less
- Shoulder provides increased performance.
- Flexing action permits repeated use and effective locking torque.
- Flange provides positive stop during installation.
PEM all-metal, self-locking fasteners are available in steel, stainless steel, and aluminum. Types LK (steel) and LKS (stainless) are treated with a black dry film lubricant for better locking performance. Type LKA (aluminum) must be used with a lubricated screw. The PEM design utilizes two rugged, semicircular flexing jaws instead of several less-supported segments. The greater ruggedness and retention of this PEMFLEX action prevents relaxation and loosening of the fastener in severe service.
This PEMFLEX design also protects the screw threads. Clearances obtained by only two interruptions of a full circumference, together with the spreading of the jaws by the entering screw, minimize the possibility of thread damage. less
Unit of Measure
Thread Size x Pitch |
N/A M4 x 0.7 |
A (Shank) Max. |
N/A
0.97 mm
Loading zoom |
Min. Sheet Thickness |
N/A 1.0 mm |
Hole Size in Sheet + 0.08 |
N/A 6.76 mm |
C Max. |
N/A 6.73 mm |
D Max. |
N/A 6.2 mm |
E Nom. |
N/A 8.73 mm |
T ± 0.25 |
N/A 4.45 mm |
Min. Dist. Hole C/L to Edge |
N/A 5.20 mm |
For Use in Sheet Hardness1 | N/A HRB 70 / HB 125 or Less |
Thread Specification |
N/A Internal, ANSI/ASME B1.13M, 6H |
Fastener Material |
N/A Carbon Steel |
Standard Finish |
N/A Black, Dry-film Lubricant over Zinc Phosphate |
Anvil Dia. |
N/A 13.00 mm |
Anvil Depth |
N/A 5.50 mm |
Breaker Corner |
N/A 0.13 mm |
Punch Dia. |
N/A 13.00 mm |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.