CAD (0)
  • Cart is empty
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

HFE (heavy-duty) Studs are designed with an enlarged head diametermore
Unit of Measure

Thread Size x Pitch

M6 x 1

Thread Code

M6

Length Code

15

Min. Sheet Thickness

1.0 mm

Hole Size in Sheet + 0.13

6 mm

L - Length ± 0.4

15 mm
a1378.jpg

H ± 0.25

11.35 mm
S Max.1 2.8 mm

T Max.

1.52 mm

Max. Hole in Attached Parts

8.3 mm

Min. Dist. Hole C/L to Edge

11.5 mm

Thread Strength

900 MPa

For Use in Sheet Hardness

HRB 85 / HB 165 or Less

Thread Specification

External, ASME B1.13M, 6g

Fastener Material

Heat-Treated Carbon Steel

Optional Finish

Zinc plated per ASTM B633, SC1 (5µm), Type II, yellow

CAD Supplier

PennEngineering® (PEM®)
  • 1 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.