Catalog
CAD (0)
▾
IFH™ self clinching studs allow for maximum material flow into the stud undercut to create a water-tight seal. Tighter tolerances and process controls produce a consistent reliable ingress capable result every time.
- Meets ISO:20653-2014 ingress protection levels
- Ingress repellent capability, meeting IPX7 and IPX9K IP ratings
- No rubber gasket or sealants needed
- Testing completed in CR4 steel, 6082-T6 aluminum, and 304 stainless steel
Unit of Measure
Thread Size x Pitch |
N/A M3 x 0.5 |
Thread Code |
N/A M3 |
Length Code |
N/A 18 |
Material Code |
N/A IFHP |
Sheet Thickness |
N/A 1.00 to 2.40 mm |
Hole Size in Sheet + 0.08 |
N/A 3.0 mm |
Max. Hole in Attached Parts |
N/A 3.0 mm |
L - Length ± 0.4 |
N/A
18 mm
Loading zoom |
H ± 0.4 |
N/A 4.6 mm |
S Max.1 | N/A 2.1 mm |
Min. Dist. Hole C/L to Edge |
N/A 5.6 mm |
For Use in Sheet Hardness |
N/A HRB 92/HB 195 or Less |
Thread Specification |
N/A External, ASME B1.13M, 2A / ASME B1.13M, 6g |
Fastener Material |
N/A Steel |
Standard Finish |
N/A Passivated and/or tested per ASTM A380 |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.