Catalog
CAD (0)
▾
PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped
into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs
and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.
SK4™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff whichmore
SK4™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff whichmore
PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped
into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs
and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.
SK4™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff which accepts a screw to secure the board or component against any unwanted movement.
SK4™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff which accepts a screw to secure the board or component against any unwanted movement.
- Allow detachable spacing of two sheets
- Clinch feature mounts fastener permanently and flush into metal sheet
- Unique barrel design allows for quick attachment and detachment Makes horizontal or vertical component mounting possible
- SK4™ standoffs are now available for installation into stainless steel sheets
Unit of Measure
Panel 1 (Bottom) Sheet Thickness Min. |
N/A 1.02 mm |
Panel 1 (Bottom) Mounting Hole B + 0.08 |
N/A 5.41 mm |
Panel 2 (Top) Thickness Range |
N/A 1.45 to 1.62 mm |
Panel 2 (Top) Mounting Hole A1 Nom. |
N/A 1.5 mm |
Panel 2 (Top) Mounting Hole A2 ± 0.08 |
N/A 3 mm |
Panel 2 (Top) Mounting Hole A3 ± 0.08 |
N/A 5 mm |
Panel 2 (Top) Mounting Hole A4 Min. |
N/A
3.75 mm
Loading zoom |
Panel 1 (Bottom) Sheet Hardness Max.1 | N/A HRB 88 / HB 183 |
Panel 2 (Top) Material |
N/A Any |
A ± 0.08 |
N/A
2.51 mm
Loading zoom |
B ± 0.08 |
N/A 4.5 mm |
C Max. |
N/A 5.39 mm |
D Anvil Hole + 0.08 |
N/A 5.39 mm |
H Nom. |
N/A 6.35 mm |
L - Length ± 0.13 |
N/A 14 mm |
M Max. |
N/A 2.75 mm |
S ± 0.08 |
N/A 1.72 mm |
Panel 1 (Bottom) Edge Distance C1 Min. |
N/A
6.60 mm
Loading zoom |
Panel 1 (Bottom) Location Tolerance Max. |
N/A ±.130 in |
Panel 2 (Top) Edge Distance C2 Min. |
N/A 4.1 mm |
Standard Material |
N/A 400 Series Stainless Steel |
Standard Finish |
N/A Passivated and/or tested per ASTM A380 |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.