Catalog

CAD (0)
▾
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs for Thin Sheets
Designed for use in harder sheets, hardness HRC 37/HB 340 or less
Designed for use in harder sheets, hardness HRC 37/HB 340 or less
- Installs flush into half hard .008” / 0.2mm stainless steel sheets
- Installs into round holes without any special mounting hole preparation, eliminating adhesives and laser welding
- Allows for light weighting and optimizing designs
- Can be installed automatically.
Unit of Measure
Thread Size |
N/A .060-80 (#0-80) |
Min. Sheet Thickness |
N/A .008 in |
Hole Size in Sheet +.002 - .000 |
N/A .128 in |
C Max. |
N/A
.125 in
![]() Loading zoom |
H Nom. |
N/A .159 in |
L +.002 -.003 |
N/A .125 in |
Min. Dist. Hole C/L to Edge |
N/A .125 in |
Anvil Chamfer Dia. A |
N/A .115-.114 in |
Anvil Length |
N/A .250 in |
Thread Specification |
N/A ASME B1.1, 2B |
Fastener Material |
N/A Hardened 400 Series Stainless Steel |
Standard Finish |
N/A Passivated and/or tested per ASTM A380 |
For Use in Sheet Hardness1 | N/A HRC 37 / HB 340 |
CAD Supplier |
N/A PennEngineering® (PEM®) |
PHH |
N/A 0.075 in |
- 1 HRC - Hardness Rockwell “C” Scale. HB - Hardness Brinell