Catalog

Photo of PEM products being manufactured
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SO4 standoffs are for installation into stainless steel sheets as thin as 1.02mm.

If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need.
Unit of Measure

Thread Size x Pitch

 N/A M4 x 0.7

Thread Code

 N/A M4

Length Code

 N/A 18

Material Code

 N/A 4

Min. Sheet Thickness

 N/A 1.27 mm

Hole Size in Sheet + 0.08

 N/A 7.14 mm

B - Counter-Bore Dia. ± 0.13

 N/A 4.8 mm a1352.jpg

C - 0.13

 N/A 7.12 mm

D ± 0.25

 N/A 8.00 mm

H Nom.

 N/A 7.9 mm

L - Length +0.05 –0.13

 N/A 18 mm

Min. Dist. Hole C/L to Edge

 N/A 8.00 mm
For Use in Sheet Hardness1 N/A HRB 88 / HB 176 or Less

Thread Specification

 N/A Internal, ANSI/ASME B1.13M, 6H

Fastener Material

 N/A 400 Series Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.