PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
  • Low cost design.
  • Small, compact and low profile design for limited access areas.
  • Two screw lengths.
  • Universal slot/Phillips recess standard.
Screw head, no spring – PFHV Metric only
Captive panel screw-Screw head, no spring – PFHV 2
Unit of Measure
Items Screw head, no spring – PFHV Metric only
PFHV-M3-0CN
Captive Panel Screw-Screw Head, No Spring – PFHV - Metric 		Screw head, no spring – PFHV Metric only
PFHV-M3-0CN
Captive Panel Screw-Screw Head, No Spring – PFHV - Metric 		Screw head, no spring – PFHV Metric only
PFHV-M3-1CN
Captive Panel Screw-Screw Head, No Spring – PFHV - Metric 		Screw head, no spring – PFHV Metric only
PFHV-M3-1CN
Captive Panel Screw-Screw Head, No Spring – PFHV - Metric 		Screw head, no spring – PFHV Metric only
PFHV-M3.5-0CN
Captive Panel Screw-Screw Head, No Spring – PFHV - Metric
Thread Size x Pitch N/A M3 x 0.5 N/A M3 x 0.5 N/A M3 x 0.5 N/A M3 x 0.5 N/A M3.5 x 0.6
Type N/A PFHV
Thread Code N/A M3 N/A M3 N/A M3 N/A M3 N/A M3.5
Screw Length Code N/A 0 N/A 0 N/A 1 N/A 1 N/A 0
A (Shank) Max. N/A 0.92 mm a1266.jpg
Min. Sheet Thickness N/A 0.92 mm
Hole Size in Sheet + 0.08 N/A 5.5 mm N/A 5.5 mm N/A 5.5 mm N/A 5.5 mm N/A 6 mm
C Max. N/A 5.49 mm N/A 5.49 mm N/A 5.49 mm N/A 5.49 mm N/A 5.98 mm
E ± 0.25 N/A 6.95 mm N/A 6.95 mm N/A 6.95 mm N/A 6.95 mm N/A 7.45 mm
G ± 0.64 N/A 5.55 mm N/A 5.55 mm N/A 7.56 mm N/A 7.56 mm N/A 6.01 mm
H ± 0.13 N/A 2.03 mm N/A 2.03 mm N/A 2.03 mm N/A 2.03 mm N/A 2.34 mm
P ± 0.64 N/A 0 mm N/A 0 mm N/A 1.90 mm N/A 1.90 mm N/A 0 mm
T1 Nom. N/A 6.69 mm N/A 6.69 mm N/A 6.69 mm N/A 6.69 mm N/A 7.45 mm
T2 Nom. N/A 11.25 mm N/A 11.25 mm N/A 11.25 mm N/A 11.25 mm N/A 12.47 mm
Driver Size N/A Slotted/#1 Phillips a1268.jpg N/A Slotted/#1 Phillips a1268.jpg N/A Slotted/#1 Phillips a1268.jpg N/A Slotted/#1 Phillips a1268.jpg N/A Slotted/#2 Phillips a1268.jpg
Min. Dist. Hole C/L to Edge N/A 5.8 mm N/A 5.8 mm N/A 5.8 mm N/A 5.8 mm N/A 6.30 mm
Thread Specification1 N/A ANSI/ASME B1.13M, 6g
Material Retainer N/A Carbon Steel
Material Screw N/A Heat-Treated Carbon Steel
Finish Retainer N/A Bright Nickel over Copper Flash per ASTM B689
Finish Screw N/A Bright nickel over copper flash per ASTM B689
For Use in Sheet Hardness N/A HRB 60 or Less (Hardness Rockwell “B” Scale)
HB 107 or Less (Hardness Brinell)
CAD View N/A Unfastened N/A Fastened N/A Unfastened N/A Fastened N/A Unfastened
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.