PennEngineering - Type HFLH™ Hard Panel Studs - Metric

Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
Allows overall weight reduction for all vehicles
Provides lower installed cost

Compare to other thin sheet fastening devices:

Unit of Measure

Items	HFLH-M5-15ZI Type HFLH™ Hard Panel Studs - Metric	HFLH-M5-20ZI Type HFLH™ Hard Panel Studs - Metric	HFLH-M5-25ZI Type HFLH™ Hard Panel Studs - Metric	HFLH-M5-30ZI Type HFLH™ Hard Panel Studs - Metric	HFLH-M5-35ZI Type HFLH™ Hard Panel Studs - Metric
Thread Size x Pitch	N/A M5 x 0.8
Thread Code	N/A M5
Length Code	N/A 15	N/A 20	N/A 25	N/A 30	N/A 35
Min. Sheet Thickness	N/A 1.0 mm
Hole Size in Sheet + 0.13	N/A 5 mm
L - Length ± 0.4	N/A 15 mm	N/A 20 mm	N/A 25 mm	N/A 30 mm	N/A 35 mm
H ± 0.25	N/A 9.6 mm
S Max.¹	N/A 2.6 mm
T Max.	N/A 1.35 mm
Max. Hole in Attached Parts	N/A 7.3 mm
Min. Dist. Hole C/L to Edge	N/A 10 mm
Tensile strength	N/A 900 MPa
For Use in Sheet Hardness²	N/A HRB 96 / HB 216 or Less
Thread Specification	N/A External, ASME B1.1, 2A / ASME B1.13M, 6g
Fastener Material	N/A Heat-Treated Alloy Steel
Standard Finish	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
Optional Finish³	N/A
CAD Supplier	N/A PennEngineering® (PEM®)
¹ Threads are gageable to within 2 pitches of the "S" Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the "S" Max. dimension. ² HRB - Hardness Rockwell "B" Scale. HB - Hardness Brinell ³ “X” suffix studs may have pitch diameters and major diameters below 2A “Basic”, per ANSI B1.1, Section 7, and B1.13M, Section 8 to allow for minimum of 0.0002” / 0.0051 mm of plating.