PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy
  • Flush-head for sheet thickness of 1.00 mm and greater.
  • Satisfies a wide range of positioning, pivot, and alignment applications.
  • Chamfered end makes mating hole location easy.
  • Type TP4 recommended for use in stainless steel sheets HRB (Rockwell “B” Scale) 92 or less and HB (Hardness Brinell) 195 or less.
Unthreaded pins, flush – TP4, TPS
Self-Clinching Pilot Pins - Type TPS™, TP4™ 2
Unit of Measure
1 

Part #

Hole Size in Sheet + 0.08

P - Nominal Pin Diameter ± 0.05

L - Length ± 0.4

D ± 0.15

H ± 0.4

Fastener Material

Standard Finish

CAD

TP4-3mm-8 N/A 3.5 mm N/A 3.00 mm N/A 8 mm N/A 2.11 mm N/A 5.2 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-4mm-8 N/A 4.5 mm N/A 4.00 mm N/A 8 mm N/A 2.82 mm N/A 6.12 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-3mm-10 N/A 3.5 mm N/A 3.00 mm N/A 10 mm N/A 2.11 mm N/A 5.2 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-4mm-10 N/A 4.5 mm N/A 4.00 mm N/A 10 mm N/A 2.82 mm N/A 6.12 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-5mm-10 N/A 5.5 mm N/A 5.00 mm N/A 10 mm N/A 3.53 mm N/A 7.19 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-3mm-12 N/A 3.5 mm N/A 3.00 mm N/A 12 mm N/A 2.11 mm N/A 5.2 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-4mm-12 N/A 4.5 mm N/A 4.00 mm N/A 12 mm N/A 2.82 mm N/A 6.12 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-5mm-12 N/A 5.5 mm N/A 5.00 mm N/A 12 mm N/A 3.53 mm N/A 7.19 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-6mm-12 N/A 6.5 mm N/A 6.00 mm N/A 12 mm N/A 4.24 mm N/A 8.13 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-3mm-16 N/A 3.5 mm N/A 3.00 mm N/A 16 mm N/A 2.11 mm N/A 5.2 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-4mm-16 N/A 4.5 mm N/A 4.00 mm N/A 16 mm N/A 2.82 mm N/A 6.12 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-5mm-16 N/A 5.5 mm N/A 5.00 mm N/A 16 mm N/A 3.53 mm N/A 7.19 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-6mm-16 N/A 6.5 mm N/A 6.00 mm N/A 16 mm N/A 4.24 mm N/A 8.13 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-5mm-20 N/A 5.5 mm N/A 5.00 mm N/A 20 mm N/A 3.53 mm N/A 7.19 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
TP4-6mm-20 N/A 6.5 mm N/A 6.00 mm N/A 20 mm N/A 4.24 mm N/A 8.13 mm N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A CAD Icon (for items table)
Unit of Measure
1