Catalog
PEM® Brand Fasteners for Metal Sheets and Panels
pem-brand-self-clinching-and-broaching-fasteners
Type SFK fasteners create a permanent, flush joining of metal to PCB/plastic panels. The fastener has two separate joining profiles. Squeezing the fastener into place causes a cold-flow of the metal panel material into the fastener’s clinch profile and a broaching fit of the knurl into the PC Board or plastic panel.
Unlike rivets that “bulb” during installation, the ultimately flush profile of SpotFast fasteners allows for unobtrusive attachment requiring minimal space. A smooth surface is retained for finishing and fasteners can be concealed easily with paints or powder coatings. /Asset/SPOTFAST.jpg
Sheet-to-Sheet Attachment
Allows permanent joining of two metal sections and metal to PCB/plastic panels- Alternative to riveting and welding.
- No special installation equipment required.
- Flush mounted on both sides.
- Minimal space requirements.
- Can be installed blind into bottom (panel 2) sheet.
- Can be concealed with paints and powder coatings.
Type SFK fasteners create a permanent, flush joining of metal to PCB/plastic panels. The fastener has two separate joining profiles. Squeezing the fastener into place causes a cold-flow of the metal panel material into the fastener’s clinch profile and a broaching fit of the knurl into the PC Board or plastic panel.
Unlike rivets that “bulb” during installation, the ultimately flush profile of SpotFast fasteners allows for unobtrusive attachment requiring minimal space. A smooth surface is retained for finishing and fasteners can be concealed easily with paints or powder coatings. /Asset/SPOTFAST.jpg
