PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
  • Provides strong external threads in blind applications.
  • Easy to install using spin/spin tooling.
  • The standard is assembled with an AEL insert but can also be assembled with an AEK or an AEH insert.
  • Other materials available.
Blind threaded studs – Type AES
Blind Threaded Studs - Metric 2
Unit of Measure
Items Blind threaded studs – Type AES
AESS-470-2.0-12.0
Blind Threaded Studs - Metric 		Blind threaded studs – Type AES
AESS-470-2.0-12.0
Blind Threaded Studs - Metric 		Blind threaded studs – Type AES
AESS-470-3.3-10.7
Blind Threaded Studs - Metric 		Blind threaded studs – Type AES
AESS-470-3.3-10.7
Blind Threaded Studs - Metric 		Blind threaded studs – Type AES
AESS-580-3.3-12.0
Blind Threaded Studs - Metric
Thread Size x Pitch N/A M4 x 0.7 N/A M4 x 0.7 N/A M4 x 0.7 N/A M4 x 0.7 N/A M5 x 0.8
Grip Code N/A 2.00 N/A 2.00 N/A 3.30 N/A 3.30 N/A 3.30
Grip Range N/A 0.50 - 2.00 mm N/A 0.50 - 2.00 mm N/A 2.00 - 3.30 mm N/A 2.00 - 3.30 mm N/A 0.50 - 3.30 mm
A ± 0.51 N/A 12.45 mm N/A N/A 13.72 mm N/A N/A 13.85 mm
B ± 0.38 N/A 9.91 mm a1044.jpg N/A 9.91 mm a1044.jpg N/A 9.91 mm a1044.jpg N/A 9.91 mm a1044.jpg N/A 10.54 mm a1044.jpg
C Nom. N/A 0.76 mm
øD Max. N/A 6.73 mm N/A 6.73 mm N/A 6.73 mm N/A 6.73 mm N/A 7.52 mm
Stud Length L Nom. (at Max. Grip)1 N/A 12 mm N/A 12 mm N/A 10.70 mm N/A 10.70 mm N/A 12 mm
M Ref. N/A N/A 9.53 mm N/A N/A 9.53 mm N/A
Hole Size In Sheet + 0.15 N/A 6.75 mm N/A 6.75 mm N/A 6.75 mm N/A 6.75 mm N/A 7.60 mm
Fastening N/A Uninstalled N/A Installed N/A Uninstalled N/A Installed N/A Uninstalled
Thread Specification N/A 6g per ASME B1.13M
Standard Material N/A Insert - Low Carbon Steel, Stud - Heat-treated carbon steel
Standard Finish N/A RoHS Compliant Zinc Yellow
CAD Supplier N/A PennEngineering® (Atlas®)
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”