PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
New self-clinching, threaded microPEM® TackScrew™ (Type TS™) fasteners enable cost effective sheet-to-sheet attachment, by simply pressing into place. The TackScrew™ fastener securely attaches a top sheet or panel to the base material. TackScrew fasteners can be removed by simply unscrewing similar to other threaded fasteners.

Features and Benefits
  • Simple, press-in installation for secure attachment
  • Proven clinch technology resists vibrational loosening.
  • Replaces micro screws, eliminating installation issues including:
    – Cost of locking patch
    – Cost of threaded insert or tapped hole
    – Cost of driver bits
    – Cost of rework due to cross-threading and driver bit “cam-out”
  • Can be installed automatically for high volume application.
  • Twists out (unscrew) if removal is necessary.Can be reinstalled one time using a thread locking adhesive.
Ideal for today’s compact electronics
  • Laptops
  • Notebooks
  • Tablet Computers
  • Cell/Smart Phones
  • Gaming / Hand Held Devices
  • Wearables
  • Automotive Electronics
microPEM® TackScrew
microPEM® TackScrew 2
Unit of Measure
Items microPEM® TackScrew
TS4-10-025
Type TS™ Self-clinching microPEM® TackScrew ™ 		microPEM® TackScrew
TS4-10-050
Type TS™ Self-clinching microPEM® TackScrew ™
Fastener Material N/A Heat-treated 400 Series Stainless Steel
Base Panel Hole Size Code N/A 10
Top Sheet Thickness Code N/A 025 N/A 050
Top Sheet Thickness N/A 0.2 to 0.28 mm.008 to .011 in N/A 0.48 to 0.56 mm.019 to .022 in
Base Panel Min. Sheet Thickness1 N/A 0.91 mm.036 in
Top Sheet Hole Size ±0.05mm/ ±.002in N/A 1.47 mm.058 in
Base Panel Hole Size ±0.025mm/ ±.001in N/A 0.99 mm.039 in
A ± 0.05mm/±.002in N/A 0.406 mm.016 in microPEM-TackScrew-2.jpg N/A 0.686 mm.027 in microPEM-TackScrew-2.jpg
H ± 0.1mm/±.004in N/A 2 mm.079 in
L ± 0.1mm/±.004in N/A 0.64 mm.025 in
P ± 0.05mm/±.002in N/A 1.3 mm.051 in
T ± 0.1mm/±.004in N/A 0.25 mm.010 in
Min. Dist. Hole C/L to Edge N/A 1 mm.039 in
Standard Finish N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness N/A HRB 89 or less (Hardness Rockwell “B” scale)
HB 187 or less (Hardness Brinell)
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 Minimum sheet to prevent protrusion from through hole or minimum blind hole depth.