PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
IFH™ self clinching studs allow for maximum material flow into the stud undercut to create a water-tight seal. Tighter tolerances and process controls produce a consistent reliable ingress capable result every time.
  • Meets ISO:20653-2014 ingress protection levels
  • Ingress repellent capability, meeting IPX7 and IPX9K IP ratings
  • No rubber gasket or sealants needed
  • Testing completed in CR4 steel, 6082-T6 aluminum, and 304 stainless steel
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M3.5 x 0.6

Thread Code

 N/A M3.5

Length Code

 N/A 30

Material Code

 N/A IFH

Sheet Thickness

 N/A 1.50 mm

Hole Size in Sheet + 0.08

 N/A 3.50 mm

Max. Hole in Attached Parts

 N/A 3.5 mm

L - Length ± 0.4

 N/A 30 mm a1375.jpg

H ± 0.4

 N/A 5.30 mm
S Max.1 N/A 2.25 mm

Min. Dist. Hole C/L to Edge

 N/A 6.40 mm

For Use in Sheet Hardness

 N/A HRB 80/HB 150 or Less

Thread Specification

 N/A External, ASME B1.13M, 2A / ASME B1.13M, 6g

Fastener Material

 N/A Steel

Standard Finish

 N/A Zinc plated per Zinc plated per (5µm), Type III, Colorless

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.