PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
IFH™ self clinching studs allow for maximum material flow into the stud undercut to create a water-tight seal. Tighter tolerances and process controls produce a consistent reliable ingress capable result every time.
  • Meets ISO:20653-2014 ingress protection levels
  • Ingress repellent capability, meeting IPX7 and IPX9K IP ratings
  • No rubber gasket or sealants needed
  • Testing completed in CR4 steel, 6082-T6 aluminum, and 304 stainless steel
IFH Penn
Self-Clinching Studs for Stainless Steel Sheets - Types FH4™ and FHP™ 2
Unit of Measure
« 6 

Part #

Thread Size x Pitch

Hole Size in Sheet + 0.08

L - Length ± 0.4

H ± 0.4

S Max.

Fastener Material

Standard Finish

CAD

IFHA-M4-20 N/A M4 x 0.7 N/A 4 mm N/A 20 mm N/A 5.9 mm N/A 2.4 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M4-25 N/A M4 x 0.7 N/A 4 mm N/A 25.00 mm N/A 5.9 mm N/A 2.4 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M4-30 N/A M4 x 0.7 N/A 4 mm N/A 30 mm N/A 5.9 mm N/A 2.4 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M4-35 N/A M4 x 0.7 N/A 4 mm N/A 35 mm N/A 5.9 mm N/A 2.4 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-10 N/A M5 x 0.8 N/A 5 mm N/A 10 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-12 N/A M5 x 0.8 N/A 5 mm N/A 12.00 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-15 N/A M5 x 0.8 N/A 5 mm N/A 15 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-18 N/A M5 x 0.8 N/A 5 mm N/A 18 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-20 N/A M5 x 0.8 N/A 5 mm N/A 20 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-25 N/A M5 x 0.8 N/A 5 mm N/A 25.00 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-30 N/A M5 x 0.8 N/A 5 mm N/A 30 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M5-35 N/A M5 x 0.8 N/A 5 mm N/A 35 mm N/A 6.5 mm N/A 2.7 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-10 N/A M6 x 1.0 N/A 6 mm N/A 10 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-12 N/A M6 x 1.0 N/A 6 mm N/A 12.00 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-15 N/A M6 x 1.0 N/A 6 mm N/A 15 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-18 N/A M6 x 1.0 N/A 6 mm N/A 18 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-20 N/A M6 x 1.0 N/A 6 mm N/A 20 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-25 N/A M6 x 1.0 N/A 6 mm N/A 25.00 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-30 N/A M6 x 1 N/A 6 mm N/A 30 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
IFHA-M6-35 N/A M6 x 1.0 N/A 6 mm N/A 35 mm N/A 8.2 mm N/A 3 mm N/A Aluminium N/A No Finish N/A CAD Icon (for items table)
Unit of Measure
« 6