PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
These standoffs offer oversized body for increased bearing surface, wall thickness and performance.
Unit of Measure

Specifications

Thread Size

 N/A .086-56 (#2-56)

Thread Code

 N/A 6256

Length Code

 N/A 625
Style1 N/A #3

Min. Sheet Thickness

 N/A .025 in

Hole Size in Sheet + .003 - .000

 N/A .213 in

C + .000 - .005

 N/A .212 in TSO4_Dwgs.jpg

F - Min. Thread Depth

 N/A .200 in

H - Nom.

 N/A .250 in
L - Length ± .0032 N/A .625 in

Min. Dist. Hole C/L to Edge

 N/A .27 in
For Use in Sheet Hardness3 N/A HRB 88 / HB 183 or Less

Thread Specification

 N/A Internal, ANSI B1.1, 2B

Fastener Material

 N/A Heat treated 400 Series Stainless Steel

Standard Finish

 N/A Passivated and/or Tested Per ASTM A380
  • 1 Style #1 - Thru-threaded.
    Style #2 - Screw might not pass through unthreaded end. Tapped to minimum full thread depth shown. Incomplete threads on tap may allow screw to pass through.
    Style #3 - Blind.
  • 2 Available in other lengths on special order.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.