PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
Magnetic Release Fastening Technology

GHOST™ Fastening Technology is ideal for achieving tight security and sleek aesthetics. This new PEM® capability produces a fully concealed fastener with zero visible evidence of disassembly once engaged.

GHOST™ Fastening Technology At-a-Glance

  • Tool-less assembly and reassembly
  • Near-instant release and disassembly using magnetic tool
  • Non-contact disassembly unlike traditional fastening solutions
  • Ample float accommodates tolerance and assembly imprecisions
  • Ultra-smooth design for sleek aesthetics
  • Concealed nature of the product makes new design avenues possible across a variety of industries and market sectors
  • Can replace many small external screw/nut assemblies

There are two floating pin styles available for the MRFS™ retainer, the MRPS™ smooth floating pin to accommodates variable engagement depth and/or tolerance stack-up and the MRHPS™ grooved floating pin which provides increased performance and decreased deflection under loading.
Unit of Measure

Specifications

Type

 N/A MRPS

Pin Dia. Code

 N/A 2.0MM

Length Code

 N/A 700
Min. Sheet Thickness - Non-cosmetic1 N/A .05 in1.26 mm
Min. Sheet Thickness - Cosmetic2 N/A .079 in2.0 mm

Blind Mounting Hole Dia. +.003 -.000/+0.08mm

 N/A .319 in8.1 mm
Min. Depth of Blind Hole3 N/A .038 in0.97 mm

A (Shank) Max.

 N/A .037 in0.94 mm MRPS--Floating-Pins_DIM.jpg

B Max.

 N/A .292 in7.42 mm

C Max.

 N/A .318 in8.08 mm

E Nom.

 N/A .337 in8.56 mm
G Air Gap
MRPS: +.015” -.007” / +0.38 -0.18mm
MRHPS: ±.004” / ±0.10mm4 		N/A .605 to .658 in15.37 to 16.71 mm

L Length ± .008” ± 0.2mm

 N/A .275 in7 mm

T Max.

 N/A .024 in0.61 mm
Min. Dist. Hole C/L to Edge5 N/A .225 in5.72 mm
Radial Float (Nom.)6 N/A .017 in0.43 mm

Axial Float (Nom.)

 N/A .006 in0.15 mm

Material

 N/A Stainless Steel

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 Values refer to thinnest recommended sheet for proper function; may cause witness marks on backside of sheet.
  • 2 Values refer to the thinnest possible sheet designed to provide an un-marked backside panel surface. Slight marking may still occur based on variability of other factors.
  • 3 Blind mounting holes may be deeper than minimums except where sheet material is at or near minimum thickness. Fasteners should always be installed so the flange is flush with he surface of the sheet.
  • 4 Air Gap dimension required to achieve intended function and fastening performance shown on page 8.
  • 5 For more information on proximity to bends and distance to other clinch hardware, see PEM® Tech Sheet C/L To Edge.
  • 6 Radial float value refers to the total amount of available float in a given direction from center.