Catalog

Photo of PEM products being manufactured
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
    Press-fit with strong, reusable threads. No heat or ultrasonics required.
  • Install with a simple arbor press.
  • Sharp knurls cut into the material to provide torque resistance.
  • Retention fin/barb adds pull-out strength.
  • Excellent for harder plastics including many thermoset resins.
  • Flange design resists higher tensile pull loads in reverse entry applications.
Unit of Measure
Items
Solid Body IPFB, IPFC and IPFA Press-in Inserts

Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Metric
Solid Body IPFB, IPFC and IPFA Press-in Inserts

Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Metric
Solid Body IPFB, IPFC and IPFA Press-in Inserts

Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Metric
Solid Body IPFB, IPFC and IPFA Press-in Inserts

Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Metric
Solid Body IPFB, IPFC and IPFA Press-in Inserts

Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Metric
Thread Size x Pitch N/A M2 x 0.4 N/A M2.5 x 0.45 N/A M3 x 0.5 N/A M3.5 x 0.6 N/A M4 x 0.7
Type N/A IPFA
Thread Code1 N/A M2 N/A M2.5 N/A M3 N/A M3.5 N/A M4
A ± 0.13
N/A 3.99 mm Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A 5.28 mm Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A 5.28 mm Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A 6.27 mm Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A 7.42 mm Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg
E ± 0.13 N/A 4.8 mm N/A 5.56 mm N/A 5.56 mm N/A 7.14 mm N/A 7.14 mm
C Max. N/A 3.05 mm N/A 3.78 mm N/A 3.78 mm N/A 4.6 mm N/A 5.38 mm
T ± 0.13 N/A 0.6 mm N/A 0.61 mm N/A 0.61 mm N/A 0.74 mm N/A 0.81 mm
Min. Hole Depth N/A 4.75 mm N/A 6.05 mm N/A 6.05 mm N/A 7.04 mm N/A 8.18 mm
Hole Dia. + 0.05 N/A 3.07 mm N/A 3.81 mm N/A 3.81 mm N/A 4.62 mm N/A 5.41 mm
Thread Specification N/A 6H per ASME B1.13M
Standard Material N/A Aluminum
CAD Supplier N/A PennEngineering® (SI®)
  • 1 Thread tapped thru, Class 3A/4h screw must pass with finger torque, but basic go gauge may stop at last thread