CAD (0)
  • Cart is empty
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

TPS, TP4 Pilot Pins satisfy a wide range of positioning, pivot,more
Unit of Measure
Items
Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric
Pin Dia. Code N/A 3 mm N/A 4 mm N/A 3 mm N/A 4 mm N/A 5 mm
Length Code N/A 8 N/A 8 N/A 10 N/A 10 N/A 10
Min. Sheet Thickness N/A 1.0 mm
Hole Size in Sheet + 0.08 N/A 3.5 mm N/A 4.5 mm N/A 3.5 mm N/A 4.5 mm N/A 5.5 mm
P - Nominal Pin Diameter ± 0.05
N/A 3.00 mm a1381.jpg N/A 4.00 mm a1381.jpg N/A 3.00 mm a1381.jpg N/A 4.00 mm a1381.jpg N/A 5.00 mm a1381.jpg
L - Length ± 0.4 N/A 8 mm N/A 8 mm N/A 10 mm N/A 10 mm N/A 10 mm
D ± 0.15 N/A 2.11 mm N/A 2.82 mm N/A 2.11 mm N/A 2.82 mm N/A 3.53 mm
H ± 0.4 N/A 5.2 mm N/A 6.12 mm N/A 5.2 mm N/A 6.12 mm N/A 7.19 mm
S Max.1 N/A 2.29 mm
Min. Dist. Hole C/L to Edge N/A 6.4 mm N/A 7.1 mm N/A 6.4 mm N/A 7.1 mm N/A 7.60 mm
For Use in Sheet Hardness N/A HRB 70 / HB 125 or Less
Fastener Material N/A 300 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 Pin diameter may exceed max. in this region.