Catalog
CAD (0)
▾
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.
Types SOAG and SOSG grounding standoffs are designed for clinching into steel or aluminum chassis while the “gripping teeth” on the opposite end of the standoff firmly contact mating PC board.
If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your specialmore need.
For special lengths greater than .500”, Types SOSG and SOAG are blind threaded. less
Types SOAG and SOSG grounding standoffs are designed for clinching into steel or aluminum chassis while the “gripping teeth” on the opposite end of the standoff firmly contact mating PC board.
If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your specialmore need.
For special lengths greater than .500”, Types SOSG and SOAG are blind threaded. less
Unit of Measure
Thread Size |
N/A .112-40 (#4-40) |
Thread Code |
N/A 6440 |
Length Code |
N/A 14 |
Min. Sheet Thickness |
N/A .040 in |
Hole Size in Sheet + .003 - .000 |
N/A .213 in |
C + .000 - .005 |
N/A
.212 in
Loading zoom |
H ± .005 |
N/A .250 in |
L - Length + .010 –.0001 | N/A .437 in |
P Nom. |
N/A .030 in |
Anvil Hole Diameter + .003 -.000 |
N/A .216 in |
Min. Dist. Hole C/L to Edge |
N/A .27 in |
For Use in Sheet Hardness2 | N/A HRB 50 / HB 82 or less |
Thread Specification |
N/A Internal, ANSI B1.1, 2B |
Fastener Material |
N/A Aluminum |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 For special lengths greater than .500” / 12 mm, Types SOSG and SOAG are blind threaded.
- 2 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.