CAD (0)
  • Cart is empty
PEM® KEYHOLE® sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. PEM KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type SKC-F is designed so that two sheets can be quickly joined flat against each other. Typically, several Type SKC-F fasteners are used with one standard PEM® threaded Type F flush nutmore
Unit of Measure

Panel 1 (Bottom) Sheet Thickness Min.

1 mm

Panel 1 (Bottom) Mounting Hole B + 0.08

5.41 mm

Panel 2 (Top) Thickness Range

1.45 to 1.62 mm

Panel 2 (Top) Mounting Hole A1 Nom.

1.5 mm

Panel 2 (Top) Mounting Hole A2 ± 0.08

3 mm

Panel 2 (Top) Mounting Hole A3 ± 0.08

5 mm

Panel 2 (Top) Mounting Hole A4 Min.

3.75 mm
a1326.jpg
Panel 1 (Bottom) Sheet Hardness Max.1 HRB 70 / HB 125

Panel 2 (Top) Material

Any

A Max.

1 mm
SKCF-F_SK4F-F_SKSF-F_TSKCF-F_TSK4-F_TSKSF-F_Dim.jpg

B ± 0.08

4.5 mm

C Max.

5.39 mm

D Anvil Hole + 0.08

4.67 mm

H Nom.

6.02 mm

M Max.

2.75 mm

N ± 0.08

2.5 mm

S ± 0.08

1.73 mm

Panel 1 (Bottom) Edge Distance C1 Min.

3.80 mm
a1325.jpg

Panel 1 (Bottom) Location Tolerance Max.

±.130 in

Panel 2 (Top) Edge Distance C2 Min.

4.1 mm

Standard Material

Hardened Steel

Standard Finish

Passivated and/or tested per ASTM A380

CAD Supplier

PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.