Catalog
CAD (0)
▾
PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel bymore squeezing them into a properly sized hole using any standard press. less
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel bymore squeezing them into a properly sized hole using any standard press. less
Unit of Measure
Panel 1 (Bottom) Thickness Min. |
N/A 1 mm |
Panel 1 (Bottom) Mounting Hole B + 0.08 |
N/A 5.41 mm |
Panel 2 (Top) Thickness Range |
N/A 1.00 to 1.80 mm |
Panel 2 (Top) Mounting Hole A +0.081 | N/A 4.00 mm |
Panel 1 (Bottom) Hardness Max.2 | N/A HRB 60 / HB 107 |
Panel 2 (Top) Hardness Max. |
N/A No limit |
Panel 1 Material3 | N/A Metal |
Panel 2 (Top) Material |
N/A PC Board or Metal |
L - Length ± 0.13 |
N/A
25 mm
Loading zoom |
B ± 0.13 |
N/A 4.78 mm |
C Max. |
N/A 5.39 mm |
H ± 0.13 |
N/A 6.35 mm |
P ± 0.13 |
N/A 3.58 mm |
Panel 1 (Bottom) Edge Distance C1 Min. |
N/A 6.60 mm |
Panel 2 (Top) Edge Distance C2 Min. |
N/A 2.54 mm |
Standard Material |
N/A Carbon Steel |
Standard Finish |
N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless |
Anvil Hole Diameter |
N/A 5.49 - 5.56 |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 Available for thicker boards on special order.
- 2 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.
- 3 Type SSA standoffs can be installed into cold-rolled steel provided hardness is less than HRB 50. HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.