Part # SKC-6060-6, KEYHOLE® Self-clinching Standoffs Type SKC™

PEM® KEYHOLE® Standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. PEM KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type SKC can be used for spacing or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which accepts a screw to secure the board or component against any unwanted movement.

Type SKC - Allows detachable spacing of two sheets

Clinch feature mounts fastener permanently into metal sheet.
Unique barrel design allows for quick attachment and detachment.
Head is flush with one side of metal sheet.
Makes horizontal or vertical component mounting possible.

Unit of Measure

Specifications

Panel 1 (Bottom) Sheet Thickness Min.	N/A .040 in
Panel 1 (Bottom) Mounting Hole B + .003 - .000	N/A .213 in
Panel 2 (Top) Thickness Range	N/A .057 to .064 in
Panel 2 (Top) Mounting Hole A1 Nom.	N/A .059 in
Panel 2 (Top) Mounting Hole A2 ± .003	N/A .118 in
Panel 2 (Top) Mounting Hole A3 ± .003	N/A .197 in
Panel 2 (Top) Mounting Hole A4 Min.	N/A .148 in
Panel 1 (Bottom) Sheet Hardness Max.¹	N/A HRB 70 / HB 125
Panel 2 (Top) Material	N/A Any
A ± .003	N/A .099 in
B ± .003	N/A .177 in
C Max.	N/A .212 in
D Anvil Hole + .003 - .000	N/A .216 in
H Nom.	N/A .250 in
L - Length ± .005	N/A .188 in
M Max.	N/A .108 in
S ± .003	N/A .068 in
Panel 1 (Bottom) Edge Distance C1 Min.	N/A .260 in
Panel 1 (Bottom) Location Tolerance Max.	N/A ±.005 in
Panel 2 (Top) Edge Distance C2 Min.	N/A .160 in
Standard Material	N/A 300 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
CAD Supplier	N/A PennEngineering® (PEM®)

¹ HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

Specifications

Panel 1 (Bottom) Sheet Thickness Min.

Panel 1 (Bottom) Mounting Hole B + .003 - .000

Panel 2 (Top) Thickness Range

Panel 2 (Top) Mounting Hole A1 Nom.

Panel 2 (Top) Mounting Hole A2 ± .003

Panel 2 (Top) Mounting Hole A3 ± .003

Panel 2 (Top) Mounting Hole A4 Min.

Panel 2 (Top) Material

A ± .003

B ± .003

C Max.

D Anvil Hole + .003 - .000

H Nom.

L - Length ± .005

M Max.

S ± .003

Panel 1 (Bottom) Edge Distance C1 Min.

Panel 1 (Bottom) Location Tolerance Max.

Panel 2 (Top) Edge Distance C2 Min.

Standard Material

Standard Finish

CAD Supplier