PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
For attachment of thin sheets to plastics, common casting materials and other similar base materials. Also available in micro sizes, which are ideal for compact electronics.

Features and Benefits
  • Secure sheets to common magnesium die casting materials such as AZ91D. Also appropriate for attaching panels to plastics such as ABS.
  • Alternative to screws, eliminating the need to tap or use threaded inserts.
  • Tapered tip for easier alignment into base panel.
  • Top sheet can be any material.
  • Low-profile head.
  • Simple, press-in installation. Does not require heat or ultrasonics.
  • Can be installed automatically.
    •
    Unit of Measure

    Specifications

    Type

    		 N/A TKA

    Base Panel Hole Size Code

    		 N/A 10

    Length Code

    		 N/A 100

    Top Sheet Hole Size

    		 N/A 0.051 in ±.002 in 1.3 mm ±0.05 mm

    Base Panel Hole Size

    		 N/A 0.039 in -.002 in 1 mm -0.05 mm

    Top Sheet Thickness Max.

    		 N/A 0.2 mm.008 in

    C Max.

    		 N/A 1.2 mm.047 in TK-Dwg-800x600.jpg

    H

    		 N/A 0.071 in ±.003 in 1.8 mm ±0.08 mm

    L

    		 N/A 0.039 in ±.002 in 1 mm ±0.06 mm

    T

    		 N/A 0.011 in ±.003 in 0.27 mm ±0.08 mm
    Min. Dist. Hole C/L to Edge1 N/A 1.18 mm.047 in

    Material

    		 N/A Aluminum

    Standard Finish

    		 N/A Plain

    For use in

    		 N/A P.C. Board and Plastics
    • 1 Minimum boss diameter is twice centerline-to-edge value.