PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
PEM® brand miniature fasteners fit into a minimal space and provide strong, reusable threads.

Types FE, FEO and UL are self-locking. Types FE and FEO thread locking torque performance is equivalent to applicable NASM25027 specifications. Ty
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M2 x 0.4

Thread Type

 N/A Self-Locking

Thread Code

 N/A M2
Shank Code1 N/A 1

A (Shank) Max.

 N/A 0.79 mm a1387.jpg
Sheet Thickness2 N/A 0.76 to 0.91 mm

Hole Size in Sheet + 0.08

 N/A 3.61 mm

C - 0.13

 N/A 3.6 mm

D Max.

 N/A 2.50 mm

E ± 0.13

 N/A 4.07 mm

T + 0.4

 N/A 1.65 mm

Min. Dist. Hole C/L to Edge

 N/A 2.80 mm

Max. Hole in Attached Parts

 N/A 2.5 mm
For Use in Sheet Hardness3 N/A HRB 70 / HB 125 or Less

Thread Specification

 N/A Internal, ANSI B1.21M, MJ 4H6H 4H5H (M6 thread)

Fastener Material

 N/A 300 Series Stainless Steel

Standard Finish

 N/A Passivated Plus Clear Dry-film Lubricant

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 Shank code applicable only to Types U and UL fasteners.
  • 2 In applications between the sheet thicknesses for your thread size, see last paragraph of installation data on page FE-6. Knurled collar may fracture if fastener is used in sheets thicker than the specified range and the screw is tightened beyond maximum tightening torque.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.