PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M5 x 0.8
Type1 N/A PS10

Thread Code

 N/A M5

Screw Length Code

 N/A 40

E Nom.

 N/A 7.10 mm a1279.jpg

H + 0.05 -0.15

 N/A 1.91 mm

L ± 0.25

 N/A 8.38 mm

T Nom.

 N/A 3.30 mm
Thread Specification2 N/A ANSI/ASME B1.13M, 6g

Material

 N/A 300 Series Stainless Steel

Finish

 N/A Passivated and/or Tested per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 2B (unified) and 6H (metric) go gauge may stop at pilot end but class 3A (unified) and 4h (metric) screws will pass through with finger torque.
  • 2 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.