Part # SFW-5-1.6-LZ, Type SFW SpotFast® Fasteners with Wave Washer for Single Point Hinging Applications On PennEngineering

Single point hinging applications.
Can be also used for single point hinging applications (not primary use).
Type SFW fasteners are shipped with mating washers (made of carbon steel, Zinc Plated, 5µm, Colorless).

Unit of Measure

Panel 1 Thickness ±0.08mm/±.003in	N/A 1.60 mm.063 in
Panel 1 Mounting Hole +0.08mm/+.003 –.000in	N/A 5.00 mm.197 in
Panel 2 Thickness Min.¹	N/A 1.60 mm.063 in
Panel 2 Mounting Hole +0.08mm/+.003 –.000in	N/A 4.00 mm.157 in
C₁ Max.	N/A 4.98 mm.196 in
C₂ Max.	N/A 3.97 mm.156 in
E Max.	N/A 5.56 mm.219 in
L Max.	N/A 3.61 mm.142 in
Nominal Gap between Panels	N/A 0.38-0.51 mm.015-.020 in
Min. Dist. Hole C/L to Edge	N/A 3.6 mm.14 in
Material Fastener	N/A Low Carbon Steel
Material Washer	N/A Carbon Steel
Finish Fastener	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless plus sealant/lubricant
Finish Washer	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness²	N/A HRB 80 / HB 150 or less
CAD Supplier	N/A PennEngineering® (PEM®)

Panel 1 Thickness ±0.08mm/±.003in