Part # TDS-175-12, Self-Clinching TY-D®Cable Tie-Mounts

PEM® TY-D® self-clinching tie-mounts provide secure attachment points for mounting wires to electronic chassis or enclosures. TY-D hardware installs quickly and permanently without screws and eliminates the use of adhesives that typically fail over time and temperature cycling.

TY-D hardware can be a great improvement over traditional mounting methods. They can be placed with assurance at designed locations and angles to remain secure for the life of the assembly; they will not protrude on the reverse side and will not affect the reverse side appearance or clearance; and panels remain flush, minimizing EMI/RFI and contamination of electronics by dust or dirt.

Unit of Measure

Specifications

Type	N/A TDS
Profile¹	N/A 175
Length Code	N/A 12
L - Length ± .003	N/A .371 in
Sheet Thickness	N/A .040 - .125 in
Hole Size In Sheet + .002 -.001	N/A .500 x .375 in
A ± .003	N/A .496 in
B ± .006	N/A .130 in
C ± .006	N/A .095 in
D ± .006	N/A .360 in
E ± .006	N/A .562 in
G - Height ± .006	N/A .285 in
Min. Hole Edge to Sheet Edge K	N/A .040 in
Min. Hole Edge to Sheet Edge M	N/A .262 in
Standard Material	N/A 17-4 Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
Max. Panel Hardness	N/A HRB 70 / HB 125 OR LESS

¹ Reference to typical load rating (in pounds) for appropriate size nylon cable tie.

Specifications

Type

Length Code

L - Length ± .003

Sheet Thickness

Hole Size In Sheet + .002 -.001

A ± .003

B ± .006

C ± .006

D ± .006

E ± .006

G - Height ± .006

Min. Hole Edge to Sheet Edge K

Min. Hole Edge to Sheet Edge M

Standard Material

Standard Finish

Max. Panel Hardness