PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
  • Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
  • Allows overall weight reduction for all vehicles
  • Provides lower installed cost
Compare to other thin sheet fastening devices:
  • Addresses environmental concerns
  • Lighter weight
  • Close to edge of panel mounting
  • No embossing required
  • Hardened stud material provides stronger thread strength
  • Can be installed automatically using press or in-die technology
Unit of Measure

Specifications

Thread Size

 N/A .313-18 (5/16-18)

Thread Code

 N/A 0518

Length Code

 N/A 8

Min. Sheet Thickness

 N/A .060 in

Hole Size in Sheet + .005 - .000

 N/A .312 in

L - Length ± .015

 N/A .500 in Type-HFL-Hard-Panel-Studs_2.jpg

H ± .01

 N/A .586 in
S Max.1 N/A .133 in

T Max.

 N/A .083 in

Max. Hole in Attached Parts

 N/A .402 in

Min. Dist. Hole C/L to Edge

 N/A .560 in

Tensile strength

 N/A 120 ksi
For Use in Sheet Hardness2 N/A HRB 96 / HB 216 or Less

Thread Specification

 N/A External, ASME B1.1, 2A / ASME B1.13M, 6g

Fastener Material

 N/A Heat-Treated Alloy Steel

Standard Finish

 N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 Threads are gageable to within 2 pitches of the "S" Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the "S" Max. dimension.
  • 2 HRB - Hardness Rockwell "B" Scale. HB - Hardness Brinell