Services

Request Information Add to CAD Cart

PEM® S-RT™ free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.

Screw turns freely until a clamp load is applied.
Resistant to vibrational loosening.
Back side of panel is flush or sub-flush for screw installation.
Locking feature reusability is not affected by number of on/off cycles.
Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.

Unit of Measure

Specifications

Thread Size	N/A .164-32 (#8-32)
Thread Code	N/A RT832
Shank Code	N/A 1
A (Shank) Max.	N/A 0.038 in
Rec. Min. Sheet Thickness¹	N/A .040 in
Hole Size in Sheet + .003 - .000	N/A .213 in
C Max.	N/A .212 in
E ± .010	N/A .310 in
T ± .010	N/A .090 in
Min. Dist. Hole C/L to Edge	N/A .27 in
For Use in Sheet Hardness	N/A HRB 80 / HB 150 or less
Thread Specification	N/A Modified thread form on loaded flank. Will accept a maximum material 6g screw.
Fastener Material	N/A Hardened Carbon Steel
Standard Finish	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
CAD Supplier	N/A PennEngineering® (PEM®)

¹ For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.