Services

Request Information Add to CAD Cart

Simply snap screw into retainer to complete assembly, spring action of plastic “fingers” holds screw in retracted position
Lobed Black ABS Cap standard
Other molded-thru colors available on special order
If you require a custom color or yo

Unit of Measure

Specifications

Thread Size	N/A .138-32 (#6-32)
Cap Color¹	N/A Orange #003
CAD View	N/A Fastened
C ± .010	N/A .440 in
E ± .010	N/A .542 in
G ± .025	N/A .248 in
L ± .015	N/A .570 in
P ± .025	N/A .026 in
T Nom.	N/A .723 in
T₁ Nom.	N/A .478 in
T₂ Nom.	N/A .646 in
Total Radial Float	N/A .020
Driver Size	N/A #2 Phillips
For Use in Sheet Hardness	N/A NOT APPLICABLE
Thread Specification²	N/A External, ANSI B1.1, 2A
Cap Material	N/A ABS. Temperature limit is 200° F / 93° C
Screw Material	N/A Carbon Steel
Screw Finish	N/A Bright Nickel over Copper Flash per ASTM B689, Type II
CAD Supplier	N/A PennEngineering® (PEM®)

¹ The colors codes #002 thru #007 are non-stocked standards and available on special order
² As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.