Part # FH-024-5ZI, Self-Clinching Threaded Studs - Type FH/FHS/FHA

Registered Users – Sign In

Search Catalog



	All Categories Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified


All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Studs and Pins for Sheet Metal > Flush-Head Studs – Types FH, FH4, FHA, FHP, FHS, FHX > Flush-Head Threaded Studs – Types FH, FHA, FHS > Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified > Part # FH-024-5ZI

Part # FH-024-5ZI, Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order.

Flush-head in designated minimum sheet thickness or greater.
Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.
Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less.

Flush-head studs - FH, FH4, FHA, FHP, FHS

larger image

Self-Clinching Threaded Studs - Type FH/FHS/FHA 2

larger image

Specifications

Thread Size

.190-24 (#10-24)

Thread Code

024

Length Code

Min. Sheet Thickness

.040 in

Hole Size in Sheet + .003 - .000

.189 in

Max. Hole in Attached Parts

.210 in

L - Length ± .015

.312 in

larger image

H ± .015

.256 in

S Max.¹

.100 in

Min. Dist. Hole C/L to Edge

.281 in

For Use in Sheet Hardness

HRB 80 / HB 150 or less

Thread Specification

External, ANSI B1.1, 2A

Fastener Material

Heat-Treated Carbon Steel

Standard Finish

Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

PennEngineering® (PEM®)

¹ Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.