Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    Self-Clinching Threaded Studs - Type FH/FHS/FHA - Metric
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Studs and Pins for Sheet Metal > Flush-Head Studs – Types FH, FH4, FHA, FHP, FHS, FHX > Flush-Head Threaded Studs – Types FH, FHA, FHS > Self-Clinching Threaded Studs - Type FH/FHS/FHA - Metric > Part # FH-M5-10ZI  

Part # FH-M5-10ZI, Self-Clinching Threaded Studs - Type FH/FHS/FHA - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order.
  • Flush-head in designated minimum sheet thickness or greater.
  • Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.
  • Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
  • Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less.




 Specifications   

Thread Size x Pitch
M5 x 0.8

Thread Code
M5

Length Code
10

Min. Sheet Thickness
1.0 mm

Hole Size in Sheet + 0.08
5 mm

Max. Hole in Attached Parts
5.60 mm

L - Length ± 0.4

 View
10 mm

H ± 0.4
6.5 mm

S Max.1
2.7 mm

Min. Dist. Hole C/L to Edge
7.2 mm

For Use in Sheet Hardness
HRB 80 / HB 150 or less

Thread Specification
External, ASME B1.13M, 6g

Fastener Material
Heat-Treated Carbon Steel

Standard Finish
Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier
PennEngineering® (PEM®)
1 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.


 MORE IMAGES 

·  FH_Installed



 DOWNLOADS 

PEM Bulletin FH

View Animation

PEMSERTER® Tooling Selector