Registered UsersSign In
Search Catalog
      GO   
 All Categories    Self-Clinching Pins - Type FH, FHS, FHA - Unified
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Studs and Pins for Sheet Metal > Flush-Head Studs – Types FH, FH4, FHA, FHP, FHS, FHX > Flush Head Unthreaded Studs – Types FH, FHS, FHA > Self-Clinching Pins - Type FH, FHS, FHA - Unified > Part # FH-073-6ZI  

Part # FH-073-6ZI, Self-Clinching Pins - Type FH, FHS, FHA - Unified


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, or stainless steel . They are also available unthreaded on special order.
  • Flush-head for sheet thickness of .040” and greater.
  • Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
  • Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
  • Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” Scale) 50 or less and HB (Hardness Brinell) 82 or less.





 Specifications   

Pin Dia. Code

073

Length Code

6

Min. Sheet Thickness

.040 in

Hole Size in Sheet + .003 - .000

.085 in

P - Nominal Pin Diameter ± .0021

View
.073 in

L - Length ± .015

.375 in

H ± .015

.150 in

S Max.2

.075 in

Min. Dist. Hole C/L to Edge

.19 in

For Use in Sheet Hardness

HRB 80 / HB 150 or less

Fastener Material

Heat-Treated Carbon Steel

Standard Finish

Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

PennEngineering® (PEM®)
1 Other pin diameters can be specified.
2 Pin diameter may exceed max. in this region.


 MORE IMAGES 

·  FH_Installed



 DOWNLOADS 

PEM Bulletin FH

View Animation

PEMSERTER® Tooling Selector