CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SOAG and SOSG grounding standoffs are designed for clinching into steel or aluminum chassis while the “gripping teeth” on the opposite end of the standoff firmly contact mating PC board.

If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need.

For special lengths greater than 12mm, Types SOSG and SOAG are blind threaded.
Unit of Measure

Thread Size x Pitch

 N/A M3 x 0.5

Thread Code

 N/A 3.5M3

Length Code

 N/A 10

Min. Sheet Thickness

 N/A 1.0 mm

Hole Size in Sheet + 0.08

 N/A 5.40 mm

C - 0.13

 N/A 5.39 mm Grounding-Standoffs---Types-SOSG--SOAG-dim.jpg

H ± 0.25

 N/A 6.4 mm
L - Length + 0.251 N/A 10 mm

P Nom.

 N/A 0.76 mm

Anvil Hole Diameter + 0.08

 N/A 5.50 mm

Min. Dist. Hole C/L to Edge

 N/A 6.8 mm
For Use in Sheet Hardness2 N/A HRB 50 / HB 82 or less

Thread Specification

 N/A Internal, ANSI/ASME B1.13M, 6H

Fastener Material

 N/A Aluminum

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 For special lengths greater than .500” / 12 mm, Types SOSG and SOAG are blind threaded.
  • 2 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.