Registered UsersSign In
Search Catalog
      GO   
 All Categories    Type SH™ Hard Panel Nuts - Unified
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Nuts for Sheet Metal > Hard Panel Nuts - Type SH™ > Type SH™ Hard Panel Nuts - Unified > Part # SH-0616-1X  

Part # SH-0616-1X, Type SH™ Hard Panel Nuts - Unified


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
  • Allows overall weight reduction for all vehicles
  • Provides lower installed cost
  • Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:
  • Addresses environmental concerns
  • Smaller outer diameter
  • Lighter weight
  • Flush on reverse side of panel
  • Close to edge of panel mounting
  • No embossing required
  • Hardened nut material provides stronger thread strength
  • Can be installed automatically using press or in-die technology





 Specifications   

Thread Size

.375-16 (3/8-16)

Thread Code

0616

Shank Code

1

A (Shank) Max.

View
.087 in

Min. Sheet Thickness1

.090 in

Hole Size in Sheet + .003 - .000

.500 in

C Max.

.499 in

E ± .010

.623 in

T ± .010

.270 in

Min. Dist. Hole C/L to Edge

.44 in

For Use in Sheet Hardness2

HRC 30 / HB 277 or Less

Thread Specification

Internal, ASME B1.1, 2B / ASME B1.13M, 6H

Fastener Material

Hardened Alloy Steel

Standard Finish3

No Finish (with Rust Preventative Oil)

Optional Finish

Consult technical support for recommended optional finishes.

CAD Supplier

PennEngineering® (PEM®)
1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
2 HRC - Hardness Rockwell "C" Scale. HB - Hardness Brinell.
3 Unplated threads are sized to accept a basic go gauge after .00025 in plating.



 DOWNLOADS 

View Animation

Tightening Torque