Catalog

Photo of PEM products being manufactured
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
IFH™ self clinching studs allow for maximum material flow into the stud undercut to create a water-tight seal. Tighter tolerances and process controls produce a consistent reliable ingress capable result every time.
  • Meets ISO:20653-2014 ingress protection levels
  • Ingress repellent capability, meeting IPX7 and IPX9K IP ratings
  • No rubber gasket or sealants needed
  • Testing completed in CR4 steel, 6082-T6 aluminum, and 304 stainless steel
Unit of Measure

Thread Size x Pitch

 N/A M2.5 x 0.45

Thread Code

 N/A M2.5

Length Code

 N/A 15

Material Code

 N/A IFH

Sheet Thickness

 N/A 1.5 mm

Hole Size in Sheet + 0.08

 N/A 2.5 mm

Max. Hole in Attached Parts

 N/A 2.5 mm

L - Length ± 0.4

 N/A 15 mm a1375.jpg

H ± 0.4

 N/A 4.1 mm
S Max.1 N/A 1.95 mm

Min. Dist. Hole C/L to Edge

 N/A 5.4 mm

For Use in Sheet Hardness

 N/A HRB 80/HB 150 or Less

Thread Specification

 N/A External, ASME B1.13M, 2A / ASME B1.13M, 6g

Fastener Material

 N/A Steel

Standard Finish

 N/A Zinc plated per Zinc plated per (5µm), Type III, Colorless

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.