Part Search
Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    KEYHOLE® Self-clinching Standoffs Type SK4™ - Metric
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Standoffs for Sheet Metal > Keyhole® Standoffs – Types SKC, SK4 > Keyhole® Standoffs – Type SK4 > KEYHOLE® Self-clinching Standoffs Type SK4™ - Metric > Part # SK4-61.5-14  

Part # SK4-61.5-14, KEYHOLE® Self-clinching Standoffs Type SK4™ - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.

SK4™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff which accepts a screw to secure the board or component against any unwanted movement.
  • Allow detachable spacing of two sheets
  • Clinch feature mounts fastener permanently and flush into metal sheet
  • Unique barrel design allows for quick attachment and detachment Makes horizontal or vertical component mounting possible
  • SK4™ standoffs are now available for installation into stainless steel sheets




 Specifications   

Panel 1 (Bottom) Sheet Thickness Min.
1.02 mm

Panel 1 (Bottom) Mounting Hole B + 0.08
5.41 mm

Panel 2 (Top) Thickness Range
1.45 to 1.62 mm

Panel 2 (Top) Mounting Hole A1 Nom.
1.5 mm

Panel 2 (Top) Mounting Hole A2 ± 0.08
3 mm

Panel 2 (Top) Mounting Hole A3 ± 0.08
5 mm

Panel 2 (Top) Mounting Hole A4 Min.
3.75 mm

Panel 1 (Bottom) Sheet Hardness Max.1
HRB 88 / HB 183

Panel 2 (Top) Material
Any

A ± 0.08

 View
2.51 mm

B ± 0.08
4.5 mm

C Max.
5.39 mm

D Anvil Hole + 0.08
5.39 mm

H Nom.
6.35 mm

L - Length ± 0.13
14 mm

M Max.
2.75 mm

S ± 0.08
1.72 mm

Panel 1 (Bottom) Edge Distance C1 Min.
6.60 mm

Panel 1 (Bottom) Location Tolerance Max.
±.130 mm

Panel 2 (Top) Edge Distance C2 Min.
4.1 mm

Standard Material
400 Series Stainless Steel

Standard Finish
Passivated and/or tested per ASTM A380

CAD Supplier
PennEngineering® (PEM®)
1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.



 DOWNLOADS 

PEM Bulletin SK

View Animation

PEMSERTER® Tooling Selector