Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    KEYHOLE® Self-clinching Standoffs Type SKC™ - Metric
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Standoffs for Sheet Metal > Keyhole® Standoffs – Types SKC, SK4 > Keyhole® Standoffs – Type SKC > KEYHOLE® Self-clinching Standoffs Type SKC™ - Metric > Part # SKC-61.5-2  

Part # SKC-61.5-2, KEYHOLE® Self-clinching Standoffs Type SKC™ - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

PEM® KEYHOLE® Standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. PEM KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type SKC can be used for spacing or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which accepts a screw to secure the board or component against any unwanted movement.

Type SKC - Allows detachable spacing of two sheets
  • Clinch feature mounts fastener permanently into metal sheet.
  • Unique barrel design allows for quick attachment and detachment.
  • Head is flush with one side of metal sheet.
  • Makes horizontal or vertical component mounting possible.




 Specifications   

Panel 1 (Bottom) Sheet Thickness Min.
1.02 mm

Panel 1 (Bottom) Mounting Hole B + 0.08
5.41 mm

Panel 2 (Top) Thickness Range
1.45 to 1.62 mm

Panel 2 (Top) Mounting Hole A1 Nom.
1.5 mm

Panel 2 (Top) Mounting Hole A2 ± 0.08
3 mm

Panel 2 (Top) Mounting Hole A3 ± 0.08
5 mm

Panel 2 (Top) Mounting Hole A4 Min.
3.75 mm

Panel 1 (Bottom) Sheet Hardness Max.1
HRB 70 / HB 125

Panel 2 (Top) Material
Any

A ± 0.08

 View
2.51 mm

B ± 0.08
4.5 mm

C Max.
5.39 mm

D Anvil Hole + 0.08
5.39 mm

H Nom.
6.35 mm

L - Length ± 0.13
2 mm

M Max.
2.75 mm

S ± 0.08
1.72 mm

Panel 1 (Bottom) Edge Distance C1 Min.
6.60 mm

Panel 1 (Bottom) Location Tolerance Max.
±.130 in

Panel 2 (Top) Edge Distance C2 Min.
4.1 mm

Standard Material
300 Series Stainless Steel

Standard Finish
Passivated and/or tested per ASTM A380

CAD Supplier
PennEngineering® (PEM®)
1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.



 DOWNLOADS 

PEM Bulletin SK

View Animation

PEMSERTER® Tooling Selector