首頁 / 製品
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Type CLA aluminum nuts are recommended for use in aluminum sheet with a hardness of HRB 50 or less on the Rockwell “B” scale.

Unplated threads are sized to accept a basic go gauge after .00025” plating.
Unit of Measure

Thread Size x Pitch

 N/A M2 x 0.4

Thread Code

 N/A M2

Shank Code

 N/A 1

A (Shank) Max.

 N/A 0.98 mm CLA-Dwg.jpg
Min. Sheet Thickness1 N/A 1.0 mm

Hole Size in Sheet + 0.08

 N/A 4.22 mm

C Max.

 N/A 4.2 mm

E ± 0.25

 N/A 6.35 mm

T ± 0.25

 N/A 1.5 mm
Min. Dist. Hole C/L to Edge2 N/A 4.8 mm
For Use in Sheet Hardness3 N/A HRB 50 / HB 82 or less

Thread Specification

 N/A Internal, ASME B1.13M, 6H

Fastener Material

 N/A Aluminum

Standard Finish

 N/A None
  • 1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

TOP