CAD (0)
  • Cart is empty

Application area

  • Round rivet nuts require little space
  • Can be universally used for component thicknesses from 0.8 to 4.0 mm and tensile strengths of up to 1200 MPa
  • Suitable for a wide range of high dynamic, static and impact load conditions
  • Suitable for use where threaded fittings need to be resistant to high axial forces
  • Also suitable for the accommodation of lateral forces
  • Can be used for GRP, CFRP, aluminum or other materials
  • Suitable for use with surface-treated, galvanized or painted components

Technical characteristics

  • Thread sizes: M6 to M14
  • P.C. 8.8 (standard)
  • Resistance to corrosion in accordance with the customer’s requirements
  • No component material thinning during riveting process
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • High resistance to twist and ejection forces, even for thin sheet metals
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
  • Nut positioning tolerance ranges can be halved as compared to welding methods
  • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
Unit of Measure

Specifications

Type

N/A Rivet Nuts

Material

N/A DIN EN 20 898 *

Thread Size d1

N/A M8x1.25

Thread Tolerance

N/A 6G DIN 13-20 *

Property Class

N/A 8 DIN EN ISO 898-2 *

Surface Coating

N/A Uncoated *

Material Application Range

N/A Aluminum - PHS

Panel Thickness Range

N/A 0.80 - 3.50 mm

Fastening Method

N/A Rivet

Panel Preparation

N/A Pre pierce and form

Nut Diameter Ød3 **

N/A 11.6 mm RSN_Dimension.JPG

Nut Diameter Ød4

N/A 8.8 mm

Nut Diameter Ød7

N/A 16 mm

Nut Thickness c

N/A 7.5 mm

Nut Thickness k3

N/A 4 mm

Nut Thickness k4

N/A 4 mm

Notes

N/A *Ask for possible variation
**Click the reference image to enlarge