Registered UsersSign In
Search Catalog
      GO   
 All Categories    PEM Type T4™ Self-clinching microPEM® TackPin® for Installing Into Stainless Steel
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Studs and Pins for Sheet Metal > Studs and Pins for Installing Into Stainless (all) – Types FH4, FHP, TP4, T4 > PEM Type T4™ Self-clinching microPEM® TackPin® for Installing Into Stainless Steel > Part # T4-10-025  

Part # T4-10-025, TYPE T4™ microPEM® TackPin® Fasteners


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

New self-clinching microPEM® TackPin® (Type T4™)fasteners are ideal for installation into stainless steel and higher strength aluminum alloy sheets. They are for use in compact electronic assemblies enabling sheet-to-sheet attachment, replacing costly screw installation in applications wheredisassembly is not required. TackPin® fasteners eliminate typical screw-relatedissues (including tapping, cross-threading, torque control, and vibration backout)and ultimately promotes quick and easy installation with minimal hardware.TackPin® fasteners can provide a good alternative to welds or adhesives.

Features and Benefits
  • Advantages over micro screws: eliminates costly tapping, cross threading, torque control, vibrationback-out and installation time.
  • Interference fit minimizes hole tolerance issues.
  • Tapered tip assists location.
  • Low-profile head provides space savings.
  • Can be installed automatically.
  • For use in stainless steel and higher strength aluminum alloy sheets..





 Specifications   

Fastener Material

Hardened 400 Series Stainless Steel

Base Panel Hole Size Code

10

Top Sheet Thickness Code

025

Top Sheet Thickness

0.2 to 0.28 mm
.008 to .011
in

Base Panel Min. Sheet Thickness1

0.89 mm
.035
in

Top Sheet Hole Size ± 0.05mm/± .002in

1.47 mm
.058
in

Base Panel Hole Size -0.05mm/ -.002in

1.02 mm
.040
in

A ± 0.025mm/±.001in

View
0.406 mm
.016
in

B ± 0.075mm/±.003in

0.610 mm
.024
in

C Max.

0.89 mm
.035
in

H ± 0.1mm/±.004in

2 mm
.079
in

P ± 0.05mm/±.002in

1.3 mm
.051
in

T ± 0.1mm/±.004in

0.2 mm
.008
in

Min. Dist. Hole C/L to Edge

1 mm
.039
in

Standard Finish

Passivated and/or tested per ASTM A380

For Use in Sheet Hardness

HRB 88 or Less (Hardness Rockwell “B” Scale)
HB 183 or Less (Hardness Brinell)

CAD Supplier

PennEngineering® (PEM®)
1 0.89 mm/.035 in for blind holes and 0.5 mm/.020 in for thru holes.



 DOWNLOADS 

PEM Bulletin MPF