Part # CKS-M3-2, PEM® CASTSERT® Press-in Inserts

Registered Users – Sign In

Search Catalog



	All Categories PEM® CASTSERT® Press-in Inserts - Metric


All Categories > PEM® Press-in Inserts for Castings > PEM® CASTSERT® Press-in Inserts - Metric > Part # CKS-M3-2


	Part # CKS-M3-2, PEM® CASTSERT® Press-in Inserts - Metric

For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT® inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.

Designed for flush installation with flat punch and anvil into blind holes or thru-holes

Process cost savings vs. coil inserts or thread tapping

Installed into drilled holes or as-cast holes with low draft angle

Pilot for rapid seating and self-alignment

Symmetric for auto-feed capability

Fastener drawings and models are available at www.pemnet.com

larger image

larger image

Specifications

Thread Size x Pitch

M3 x 0.5

Type

CKS

Thread Code

Length A ±0.13

7.62 mm

larger image

Pilot C Max.

5.31 mm

After Knurl E (Nom.)

5.79 mm

Min. Sheet Thickness R

7.75 mm

Straight Hole Dia. D + 0.08

5.56 mm

Min. Dia. H of Tapered Hole at Length R¹

5.33 mm

Min. Dist. Hole C/L to Edge

4.44 mm

Standard Material

300 Series Stainless Steel

Standard Finish

Passivated and/or tested per ASTM A380

CAD Supplier

PennEngineering® PEM®

¹ Draft hole performance will vary greatly depending on length of engagement of the knurl over the installed length. For best results, recommend use of 3 degree or less total draft and design hole as close to H as possible at depth R to optimize length and depth of knurl engagement.

VIEW CAD DRAWING



· 3D


· 2D Front View


· 2D Right Side View


· 2D Sales Drawing

DOWNLOADS


		CK™ Press-In Inserts For Castings And Soft Metals (PDF, 1047KB)

Part # CKS-M3-2, PEM® CASTSERT® Press-in Inserts - Metric

Thread Size x Pitch

Type

Thread Code

Length A ±0.13

Pilot C Max.

After Knurl E (Nom.)

Min. Sheet Thickness R

Straight Hole Dia. D + 0.08

Min. Dia. H of Tapered Hole at Length R¹

Min. Dist. Hole C/L to Edge

Standard Material

Standard Finish

CAD Supplier

Download our brochure

Product resources

Services

Our Brands

Useful Links

Departments

Part # CKS-M3-2, PEM® CASTSERT® Press-in Inserts - Metric

Thread Size x Pitch

Type

Thread Code

Length A ±0.13

Pilot C Max.

After Knurl E (Nom.)

Min. Sheet Thickness R

Straight Hole Dia. D + 0.08

Min. Dia. H of Tapered Hole at Length R1

Min. Dist. Hole C/L to Edge

Standard Material

Standard Finish

CAD Supplier

Download our brochure

Product resources

Services

Our Brands

Useful Links

Departments

Min. Dia. H of Tapered Hole at Length R¹