Registered Users – Sign In
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Sheet-to-Sheet Attachment > Self-clinching microPEM® TackPin® > PEM Type TA™ Self-clinching microPEM® TackPin® > Part # TA-10-050  

Part # TA-10-050, TYPE TA™ microPEM® TackPin® Fasteners

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

New self-clinching microPEM® TackPin® (Type T™) fasteners for compact electronic assemblies enable sheet-to-sheet attachment, replacing costly screw installation in applications where disassembly is not required. TackPin fastener use eliminates typical screw-related issues (including tapping, cross-threading, torque control, and vibration backout) and ultimately promotes quick and easy installation with minimal hardware. TackPin fasteners can provide a good alternative to welds or adhesives.

Features and Benefits
  • Micro sized for fastening within very compact designs.
  • Attaches top sheets as thin as 0.2 mm / .008 in.
  • Clinches into base panels as hard as HRB 45 / HB 84.
  • Interference fit minimizes hole tolerance issues.
  • Tapered tip assists location.
  • Low-profile head provides cosmetic benefits.
  • Replaces screws: eliminating costly tapping, cross threading, torque control, vibration backout and installation time.
Ideal for today’s compact electronics
  • Laptops
  • Notebooks / Ultrabook™ Devices
  • Tablet Computers
  • Cell/Smart Phones
  • Gaming / Hand Held Devices
  • Ultrabook™ is a trademark of Intel Corporation




 Specifications   

Fastener Material
Aluminum

Base Panel Hole Size Code
10

Top Sheet Thickness Code
050

Top Sheet Thickness
0.48 to 0.56 mm
.019 to .022 in

Base Panel Min. Sheet Thickness1
0.89 mm
.035 in

Top Sheet Hole Size ± 0.05mm/± .002in
1.47 mm
.058 in

Base Panel Hole Size -0.05mm/ -.002in
1.02 mm
.040 in

A ± 0.025mm/±.001in

 View
0.686 mm
.027 in

B ± 0.075mm/±.003in
0.610 mm
.024 in

C Max.
0.89 mm
.035 in

H ± 0.10mm/±.004in
2 mm
.079 in

P ± 0.05mm/±.002in
1.3 mm
.051 in

T ± 0.10mm/±.004in
0.2 mm
.008 in

Min. Dist. Hole C/L to Edge
1 mm
.039 in

Standard Finish
Plain

For Use in Sheet Hardness
HRB 45 or Less (Hardness Rockwell “B” Scale)
HB 84 or Less (Hardness Brinell)

CAD Supplier
PennEngineering® (PEM®)
1 0.89 mm/.035 in for blind holes and 0.5 mm/.020 in for thru holes.



 DOWNLOADS 

PEM Bulletin MPF


Conflict Minerals Policy

RoHS Guide

Supplier Conflict Minerals Survey

Customer Satisfaction Survey

ISO Certificate