首頁 / 製品
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
These standoffs offer oversized body for increased bearing surface, wall thickness and performance.
Unit of Measure

Thread Size x Pitch

 N/A M2.5 x 0.45

Thread Code

 N/A 6M25

Length Code

 N/A 400
Style1 N/A #1

Min. Sheet Thickness

 N/A 0.63 mm

Hole Size in Sheet + 0.08

 N/A 5.41 mm

C - 0.13

 N/A 5.39 mm TSO4_Dwgs.jpg

F - Min. Thread Depth

 N/A 5.2 mm

H - Nom.

 N/A 6.4 mm
L - Length ± 0.082 N/A 4 mm

Min. Dist. Hole C/L to Edge

 N/A 7.1 mm
For Use in Sheet Hardness3 N/A HRB 88 / HB 183 or Less

Thread Specification

 N/A Internal, ASME B1.13M, 6H

Fastener Material

 N/A Heat treated 400 Series Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380
  • 1 Style #1 - Thru-threaded.
    Style #2 - Screw might not pass through unthreaded end. Tapped to minimum full thread depth shown. Incomplete threads on tap may allow screw to pass through.
    Style #3 - Blind.
  • 2 Available in other lengths on special order.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

TOP