CAD (0)
  • Cart is empty
Unit of Measure
Items
Tool only, spinning clinch bolt, no spring – SCB, SCBJ

Captive Panel Screw-Tool only, Spinning Clinch Bolt, No Spring - Metric Type SCBJ

Tool only, spinning clinch bolt, no spring – SCB, SCBJ

Captive Panel Screw-Tool only, Spinning Clinch Bolt, No Spring - Metric Type SCBJ

Tool only, spinning clinch bolt, no spring – SCB, SCBJ

Captive Panel Screw-Tool only, Spinning Clinch Bolt, No Spring - Metric Type SCBJ

Tool only, spinning clinch bolt, no spring – SCB, SCBJ

Captive Panel Screw-Tool only, Spinning Clinch Bolt, No Spring - Metric Type SCBJ

Tool only, spinning clinch bolt, no spring – SCB, SCBJ

Captive Panel Screw-Tool only, Spinning Clinch Bolt, No Spring - Metric Type SCBJ
Thread Size x Pitch N/A M3 x 0.5 N/A M3 x 0.5 N/A M3 x 0.5 N/A M3 x 0.5 N/A M4 x 0.7
Type N/A Jacking - SCBJ N/A Jacking - SCBJ N/A Jacking - SCBJ N/A Non-Jacking - SCB N/A Jacking - SCBJ
Thread Code N/A M3 N/A M3 N/A M3 N/A M3 N/A M4
Screw Length Code N/A 6 N/A 10 N/A 12 N/A 12 N/A 6
Min. Sheet Thickness N/A 1.02 mm
Hole Size in Sheet + 0.08 N/A 3.0 mm N/A 3.0 mm N/A 3.0 mm N/A 3.0 mm N/A 4 mm
E ± 0.25
N/A 6.60 mm a1271.jpg N/A 6.60 mm a1271.jpg N/A 6.60 mm a1271.jpg N/A 6.60 mm a1271.jpg N/A 8.28 mm a1271.jpg
H Nom. N/A 2.03 mm
L - Length ± 0.4 N/A 6 mm N/A 10 mm N/A 12 mm N/A 12 mm N/A 6 mm
T Nom. N/A 3.70 mm N/A 7.70 mm N/A 9.70 mm N/A 3.30 mm N/A 3.70 mm
Nom. Axial Float N/A N/A N/A N/A 7.67 mm N/A
Driver Size N/A #1 Phillips N/A #1 Phillips N/A #1 Phillips N/A #1 Phillips N/A #2 Phillips
Min. Dist. Hole C/L to Edge N/A 3.3 mm N/A 3.3 mm N/A 3.3 mm N/A 3.3 mm N/A 5.00 mm
Thread Specification1 N/A ANSI/ASME B1.13M, 6g
Material N/A Heat-Treated Carbon Steel
Finish N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
Finish Spring N/A Natural Finish
For Use in Sheet Hardness N/A HRB 80 or Less (Hardness Rockwell “B” Scale) / HB 150 or Less (Hardness Brinell)
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.